D-Link DGS-1005D 5-Port 10/100/1000 Gigabit Switch, Desktop Review

Average Reviews:

(More customer reviews)I had been using the older 10/100 D-Link switch (DSS-5+) for over two years and never had any kind of problem. About three weeks ago, I wrote a review of that switch here and mentioned that I'd like to try the Gigabit version (this one). After thinking about it for a bit, and realizing how inexpensive these things are, I went out and bought it. Exactly as I said for the DSS-5+, this is a great little switch that's definitely worth the money. All the ports are in the back, the casing has a brushed aluminum look, and it's fanless. So, it's definitely possible to leave it sitting on the desk. Since the "switching fabric" supports 10Gb/sec, that means each of the five ports can carry their full 2Gb/sec (1Gb/sec each way) capacity without problem. The darn thing doesn't even get warm. Definitely a good buy (I rate it at 5 stars out of 5).
Darn near every computer sold these days has a Gigabit Ethernet connection built into it. So, assuming you have the proper cabling (Cat 5e or Cat 6), using a Gigabit switch should let you take advantage of the added speed on your local network. However, it won't make any difference across the Internet since only a rare few cable modem even connect at 100Mb/sec and, as far as I know, none connect at 1 GB/sec.

Click Here to see more reviews about: D-Link DGS-1005D 5-Port 10/100/1000 Gigabit Switch, Desktop

D-Link (DGS-1005D) SWITCH 5-PORT 10/100/1000MBPS

Click here for more information about D-Link DGS-1005D 5-Port 10/100/1000 Gigabit Switch, Desktop

Read More...

Wired Home TLNS RJ45 Two Line Network Splitter Pair Review

Average Reviews:

(More customer reviews)You can't use this product to split the Internet line to connect two separate devices. What you are looking for is a Router or a Switch. Internet signal is a digital signal with a designated IP (Internet Protocol) address. Each Network device has to have a unique IP address and a DHCP server to releases that IP address. This device only splits the signal. It dose not assign IP addresses or act as a DHCP server.

Click Here to see more reviews about: Wired Home TLNS RJ45 Two Line Network Splitter Pair

More electronics are internet-enabled than ever before-gaming consoles, satellite receivers, televisions, and DVRs offer even more features when connected to the internet, and require a unique IP address and network connection for use when connected to a router. Most Base 10/100 Ethernet networks installed in homes require only two pairs of conductors for operation, allowing two different network connections over one Category cable. Wired Home network line splitter/combiners take advantage of this and enable two network connections be made over a single cable, effectively doubling the amount of network connections possible in your installation without re-running cable. Each network splitter/combiner features RJ45 input/output ports, and a cabled RJ45 output plug. System labeling placards and connection insert identifiers are included.

Get 26% OFF

Click here for more information about Wired Home TLNS RJ45 Two Line Network Splitter Pair

Read More...

NETGEAR GSM7324 24-Port Layer 3 Switch Review

Average Reviews:

(More customer reviews)I used to hate network uptime. When the LAN was up for more than a few days at a time, I would get angry and punchy.
That has all changed, friends.
Now that I have the Netgear GSM7324, I don't have to worry about the network being up for too long; it automatically kills the LAN on it's own.
The best part is, it is totally unpredictable, so each time my users yell "Hey, I can't get to wiki" or "Is there something wrong with the Internet?", it's like a special surprise for everybody.
I mean really, do you really _need_ access to your gateway while trying to commit CVS at the end of the day? And who wants to be able to read email while at work? It's much better to pay a bunch of software engineers and marketing consultants to sit idle while the IT guy is power cycling all the switches on the network trying to clear up whatever happy fun issue is taking down LAGs and VLANs one by one.
Sure, I could have bought a Cisco, but that drab bluegreygreen color totally clashes with my server room. Also, there is my hatred of a stable network to consider.
I'm sure if I was just using this switch to do simple layer 2 stuff my LAN would stay up longer, but since I wanted to actually break the network as fast as ARP'ingly possible, I made sure to turn on some of the features Netgear claims this box can support.
I would have given this unit a higher rating, but sometimes my network is up for nearly half a week before it dies. That's nearly two and one half days without my users sitting idle while I troubleshoot, or going home early because they can't get anything done at work.
One last advantage of using this Netgear "layer 3 switch" is their superb support team. I used to have to sit on the phone with other company's support staff, getting answers to my questions, or offers to VPN in to take a look at the situation. Now, I am all smiles as I get the same exact say statement each time I call support.
I don't have to worry anymore about getting help with the problem from a qualified network engineer type.
Could you pass the Dosas?

Click Here to see more reviews about: NETGEAR GSM7324 24-Port Layer 3 Switch

The NETGEAR Managed Gigabit Switch provides maximum throughput and flexibility for demanding networks with all the Layer 3 features you expect. This 10/100/1000 switch addresses today's highperformance requirements while providing the control you need i and the future proofing you want. The GSM7324 is ideal as a backbone for 10/100 switches Gigabit servers or as the robust core of a demanding all-Gigabit network. The GSM7324 can be used to provide new IP-based services. Layer 3 routing combined with Quality of Service and access control features enable Voice over IP (VoIP) telephony video conferencing and other cost-saving applications. Primary InformationNetworking Type:SwitchForm Factor:Rack-mountableData Transfer Rate:1 GbpsData Link Protocol:Ethernet; Fast Ethernet; Gigabit EthernetNetworking / Ports Qty:24Connectivity Technology:CableDimensions&MiscellaneousWidth:17.3 InchDepth:15.2 InchHeight:1.7 InchSystemNetworking / Compliant Standards:IEEE 802.3; IEEE 802.1D; IEEE 802.1P; IEEE 802.1Q; IEEE 802.1w; IEEE 802.3U; IEEE 802.3x; IEEE 802.3z; IEEE 802.3ab; IEEE 802.3ad (LACP)Remote Management Protocol:HTTP; SNMP; RMON 1; RMON 2; RMON 3; RMON 9; TelnetService&SupportService & Support Type:Lmtd. LifeUNSPSC CodeUNSPSC Code:43222612Product IDUPC:606449029062Manufacturer Part:GSM7324NA

Click here for more information about NETGEAR GSM7324 24-Port Layer 3 Switch

Read More...

NETGEAR GS108 ProSafe 8-Port Gigabit Ethernet Desktop Switch Review

Average Reviews:

(More customer reviews)This switch is exactly what I expected it to be: solid. Just like the other Netgear equipment I've used, the GS108 is completely hassle-free. My whole house was literally wired for gigabit Ethernet in no more time than it took to plug in the cables. I took it out of the box, plugged in the power cord, and plugged in connections (including a router and the patch cables to the rooms in my home), and went about my networking. It's completely idiot-proof, since all 8 ports automatically detect connection speed and uplink/downlink (meaning that no special cables are needed to hook up additional switches or routers). Plus, the indicator lights show which ports are in use, and at what speeds (10Mb, 100Mb, or 1Gb).
The form factor is great, too: At about 9 inches wide by 4 inches deep by 1 inch thick, it's small enough that I was easily able to place it inside the structured wiring panel, and so light that a little heavy velcro holds it fast. Plus, it doesn't put out a lot of heat; even with the door to the panel closed, it feels warm but never hot to the touch.

Click Here to see more reviews about: NETGEAR GS108 ProSafe 8-Port Gigabit Ethernet Desktop Switch

The NETGEAR GS108 ProSafe 8-Port Gigabit Ethernet Desktop Switch provides your local area network (LAN) with reliable 10/100/1000 Mbps auto-sensing connectivity for eight users.
Sturdy and Reliable Design NETGEAR's GS100 series desktop switches are housed in a compact sturdy metal case designed without the need for internal fans, keeping operation both silent and more reliable. It can be placed on a flat surface or you can use the included wall mount kit to hide it away on the wall.
Simple Setup and Stellar Performance Plug in your Ethernet cables and connect a power cord, and you're ready to go. There is no software to install or settings to configure. The switch features auto-sensing ports which automatically obtains the fastest possible connection. There are no toggle switches or special crossover cables. The switch will honor priority tags at both the Layer 2 and Layer 3 level if you have your network set to support jumbo frames.
Every port supports up to 2000 Mbps in dedicated bandwidth. Automatic flow control ensures smooth traffic. There is a queue buffer memory of 12 kbytes per port and a MAC address database size of 4,000. The switch has status LEDs for power, and link, speed, and activity for each port.
The NETGEAR GS108 ProSafe 8-Port Gigabit Ethernet Desktop Switch has a Mean Time Between Failure of 91,500 hours and is backed by a lifetime warranty. The power adapter is backed by a 2-year warranty.
What's in the Box GS108 Desktop Switch, wall-mount kit, power adapter, installation guide, warranty/support information card.

Get 29% OFF

Click here for more information about NETGEAR GS108 ProSafe 8-Port Gigabit Ethernet Desktop Switch

Read More...

1 foot Category 5e Cat5e Ethernet Network Patch Cable Cord for Internet Router Switch Hub and Gaming - GRAY - Gold Plated Male to Male RJ45 Connectors for Base-T Networks - Works best for your desktop laptop router modem switch hub DSL Xbox PS2 or PS3 Review

Average Reviews:

(More customer reviews)the cable works fine, but looks like it was made by hand. there are no cable protectors at the ends, just the clears. the picture is accurate.


Click Here to see more reviews about: 1 foot Category 5e Cat5e Ethernet Network Patch Cable Cord for Internet Router Switch Hub and Gaming - GRAY - Gold Plated Male to Male RJ45 Connectors for Base-T Networks - Works best for your desktop laptop router modem switch hub DSL Xbox PS2 or PS3

The advanced networks of today often require the use of high-speed cabling to distribute data, voice and video, and with our Cat5 Patch Cables you can stay ahead of the game. These cables will accommodate speeds of up to 350 MHz when connected to the appropriate hardware. Each comes UL verified to meet all Cat 5e TIA/EIA 568-A/B standards, and drastically reduces both impedance and structural return loss (SRL) compared to standard 100 MHz wire! This is accomplished by bonding together each of the individual pairs, helping to maintain the twist-spacing throughout the line right up to your termination point. Constructed with high-quality wire, and shortened body plug design keeps their Near-end Crosstalk (NEXT) levels to a minimum. foot feet ft. The shipping of this item is per item.

Get 93% OFF

Click here for more information about 1 foot Category 5e Cat5e Ethernet Network Patch Cable Cord for Internet Router Switch Hub and Gaming - GRAY - Gold Plated Male to Male RJ45 Connectors for Base-T Networks - Works best for your desktop laptop router modem switch hub DSL Xbox PS2 or PS3

Read More...

Cables To Go 31344 Cat6 550 MHz Snagless Patch Cable, Green (5 Feet) Review

Average Reviews:

(More customer reviews)Beware buying this product from the vendor "Citi Electronics." They shipped me generic no-name brand cables, instead of the unique Cables-To-Go snagless custom boots. The "generics" are like typical Ethernet cables with the thick molded boot that fully encapsulates the plastic tab used to unlock the cable from a jack. I've found trying to press on this thick "thumb bump" boot to push on the tab difficult to use and sometimes I have to pull the boot back in order to press directly on the tab to properly disengage it. It seems these generic boots are just too large and may actually be pressed up against the jack housing causing tension on the jack and making disengagement harder (hence my need to peel back the boot or forcibly push the cable further into the jack to unload the tension on the tab).
Which is why I now use the Cables-To-Go snagless versions as it uses a light and small vinyl flap that rests on the plastic locking tab to aid in disengaging yet allows easy unobstructed view and access to this tab to ensure you are properly disengaging it without adding any stress or tension to the connection.

Click Here to see more reviews about: Cables To Go 31344 Cat6 550 MHz Snagless Patch Cable, Green (5 Feet)

With Cables To Go's Cat6 550Mhz Snagless Patch Cables you can stay ahead of the game with the use of this high-speed cabling to distribute data, voice and video. These cables will deliver stable performance to 550 MHz. Each comes UL verified, and meets EIA/TIA Cat 6 TIA/EIA- 568-B-2.1, draft 9 standards. These cables will handle bandwidth intensive applications up to 550 Mhz and beyond and drastically reduce both impedance and structural return loss (SRL) as compared to standard 100 Mhz wire! This is accomplished by bonding together each of the individual pairs, helping to maintain the twist-spacing throughout the line right up to your termination point. Constructed with high-quality wire and a shortened body plug will keep Near-end Crosstalk (NEXT) levels to a minimum. The molded, snag-free boot prevents unwanted cable snags during installation and provides strain-relief. Cables To Go Cat6 550Mhz Snagless Patch Cables are available in a variety of colors to easily color-code your network installation.

Get 35% OFF

Click here for more information about Cables To Go 31344 Cat6 550 MHz Snagless Patch Cable, Green (5 Feet)

Read More...

Netgear FS105NA Switch 5Port Metal Review

Average Reviews:

(More customer reviews)With switch prices coming down to about $10-per-port, it's hard to justify buying anything less than a 10/100-switch for all but the most cost-conscious buyer.
As most 5-port 10/100 switches have the same capabilities and cost about the same, there's not much to distinguish one from another. Still, I particularly like the Netgear FS-105 5-port switch. Like other products from Netgear, this switch is a little nicer than the competition because it has:
- Nice sturdy metal construction instead of plastic. The case also has a grounding tab in case you're using the switch in a (electrically) high-noise environment.
- Connection status indicators built into the jacks, so you can easily tell which cable is connected and is active. (The "vistajack" feature.)
- Right-angled barrel power connector which reduce the likelihood of disconnecting power accidentally.
- An easy-to-access switch to toggle port 1 between station mode and uplink mode. Unlike some hubs where two jacks are wired together, this design prevents accidentally shorting a station to an uplink.
- Screw-mount notches on the underside allows for easy attachment to the wall, underside of a counter, etc.
With a 1000-MAC address buffer and 200 Kbytes-per-port packet buffer, this switch can easily handle the typical traffic load of small- and medium-sized networks.
The Netgear product is not the cheapest 10/100-switch (check out the D-Link Fast Ethernet Switch, for example), but for overall design and value-for-money, I still like the Netgear the most.

Click Here to see more reviews about: Netgear FS105NA Switch 5Port Metal

The NETGEAR FS105 ProSafe 5-Port 10/100 Desktop Switch provides your local area network (LAN) with a reliable 10/100 Mbps auto-sensing connectivity for five users.
Sturdy and Reliable Design NETGEAR's FS100 series desktop switches are housed in a compact sturdy metal case designed without the need for internal fans, keeping operation both silent and more reliable. It can be placed on a flat surface or you can use the included wall mount kit.
Simple Setup and Stellar Performance Plug in your Ethernet cables and connect a power cord, and you're ready to go. There is no software to install or settings to configure. The switch features auto negotiation, which automatically obtains the fastest possible connection, and Auto Uplink takes care of the MDI/MDI-X connection. There are no toggle switches or special crossover cables. If your network has existing 10BASE-T devices, they will work seamlessly within a higher bandwidth environment with each port achieving its full speed.
Every port supports up to 200 Mbps in dedicated bandwidth. Automatic flow control ensures smooth traffic. The FS105 has 64 KB of buffer memory and an address database size of 1,000. The switch has status LEDs for power, and link, speed, and activity for each port.
The NETGEAR FS105 ProSafe 5-Port 10/100 Desktop Switch has a Mean Time Between Failure (MTBF) of 390,000 hours and is backed by a lifetime warranty. The power adapter is backed by a 2-year warranty.
What's in the Box FS105 Desktop Switch, wall-mount kit, power adapter, quick installation guide, warranty/support information card.

Click here for more information about Netgear FS105NA Switch 5Port Metal

Read More...