D-Link DWL-G120 Wireless USB Adapter, 802.11g, 54Mbps Review

Average Reviews:

(More customer reviews)I purchased 2 D-Link DWL-G120 802.11g adapters from Amazon through Office Depot to use on two Tivo DVR's. I wanted the extra speed of these adapters, which were the only 802.11g adapters recommended by Tivo. I bought them specifically to make use of the Tivo To Go features that allows you to watch a show on one Tivo that was recorded on another one via the network and to transfer recordings from a Tivo to my PC. Neither feature worked with these adapters. If you read the Tivo website carefully, you will see they recommend D-Link DWL-G120 version B2. The Amazon website did not indicate what version was being sold. I was shipped the B1 version and they keep losing the connection whenever I try to transfer recordings from one Tivo to the other or to my PC. A Tivo person on their community forum verified that a different chipset is on the B2 and that the B1 causes hangups and freezes like what I experienced.
By the way, I don't think the 802.11g makes the transfers any faster than 802.11b. Even when the transfers were working before freezing, the speed was about the same or slower than real time. I've read technical reviews on other adapters and they all say the same thing. Of course, Tivo doesn't mention this in all their hype about Tivo to Go.
I emailed Office Depot to see if I could get a refund or exchange them for the proper version. So far, no reply from Office Depot. To be fair, the first adapter was defective, but Office Depot shipped me a replacement within 3 business days after I phoned them, not that it mattered as it turned out. I'll give them a great review as a merchant if they take back the two I still have.
My advice, pay the extra cost and buy adapters direct from Tivo. Then you only have one vendor to deal with if problems develop. If I ever get the B2 version and they work well, I'll post a new review, but for now I'm giving these adapters the lowest rating possible - 1 star.

Click Here to see more reviews about: D-Link DWL-G120 Wireless USB Adapter, 802.11g, 54Mbps

D-Link's AirPlus XtremeG DWL-G120 Wireless USB Adapter makes wireless networking easier to use with its USB 2.0 connection. Using the 802.11g standard, the DWL-G120 offers transfer rates of up to 54Mbps.The DWL-G120 also works with 802.11b standard wireless devices and when used with other D-Link AirPlus Xtreme G products delivers throughput speeds capable of handling heavy data payloads including MPEG video streaming. Like all D-Link wireless adapters, the DWL-G120 can be used in ad-hoc mode to connect directly with other 802.11g or 802.11b wirelessly-enabled computers for peer-to-peer file sharing or in infrastructure mode to connect with a wireless access point or router for access to the Internet in your office or home network.

Get 2% OFF

Click here for more information about D-Link DWL-G120 Wireless USB Adapter, 802.11g, 54Mbps

Read More...

NETGEAR ME102 - Wireless access point 32 - Ethernet Review

Average Reviews:

(More customer reviews)I just received my ME102 today, and it was up and running in 5 minutes (not counting the time required to drive the screws [included] to wall-mount the unit near one of my Ethernet switches).
I didn't find the USB-based configuration to be ideal. To be sure, it worked well. But I don't like installing drivers and software on my PC that will be used only once or occasionally, and the rest of the time just adds more junk to the Windows registry and is yet another thing added to program groups. (I have issues with clutter.)
In any case, as others here have mentioned, documentation is sparse indeed. And frankly, if you don't know your TCP/IP network pretty well, and/or don't know the basics of wireless Ethernet concepts, you might well find yourself in over your head. The default configuration is far from one-size-fits-all, and the average home computer user will have trouble changing it -- especially with the somewhat non-intuitive interface to the config software.
All that said, once this baby is set-up and running, it's great. I get terrific range and excellent performance, even with a basement mounted access point.
My only caution: Beware of your 2.4 GHz cordless phones. This would be true of any 802.11b set-up, but some of these cordless phones will chew-up your data stream and spit it out in chunks on the carpet. Here, I have my choice between using the wireless Ethernet, or using a Panasonic 2.4 GHz phone... Any attempts to use both, and the phone wins. (The Panasonic is going in the trash very soon; a Uniden 2.4 GHz model cooperates fine.)

Click Here to see more reviews about: NETGEAR ME102 - Wireless access point 32 - Ethernet

Netgear's wireless access point gives mobile users continuous,high-speed 11 Mbps access to corporate network resources, e-mail, and theInternet. It helps you quickly set up a new wireless network office or extendyour existing Ethernet network to remote locations in your building, without thetime or expense of Ethernet cabling. Equipped with a Netgear cable/DSL router,it lets all users on your wireless network share broadband Internet access.Multiple access points may be used to extend the coverage as well as increasethe number of wireless users. The ME102 supports roaming from access point toaccess point within an office and includes 40-bit WEP encryption to ensureprivacy.
Supporting 32 users per access point, the ME102 works with any 10 Mbps Ethernetand any IEEE 802.11b-compliant product. It comes with a five-year limitedwarranty.

Click here for more information about NETGEAR ME102 - Wireless access point 32 - Ethernet

Read More...

RCA RIR205 Infinite Radio Tabletop Internet Radio with Wi-Fi Enabler (Black) Review

Average Reviews:

(More customer reviews)The RIR205 looks good and seems to be well made. It can pickup most internet radio stations from around the world. That includes real radio stations if they are broadcasting live on the internet and also amateur stations being broadcast by individuals. Of course you can do the same thing with a PC but it's harder to do and you have to install different audio player programs, codecs and all sorts of things while the radio just works. It will even play BBC stations that I can't play on the PC because it says I'm not in the U.K. It has stereo speakers that provide good fidelity but they are small and not as loud as some other radios having just one big speaker. The radio will play Slacker Radio which isn't a real radio station but has almost any kind of music sort of like like XM or AOL radio. Slacker will usually work when other internet stations won't. They may have less bandwidth requirements or less overhead to play, I'm not sure. The radio has an alarm clock function but since it gets it's time from the internet I found that although the time is usually accurate it's not always reliable because it won't work if the internet out of service like mine frequently is.
Originally I purchased an RIR200 from J&R through Amazon but when I got it couldn't get it to work at all so I only gave it 1 star. I sent it back and it was replaced with an RIR205. Audiovox was good about replacing it and are more helpful than most other companies. The two radios seem to be identical except the 205 comes with it's own wireless router but I never got that. The new RIR205 wouldn't work at first either and even though I already had 3 older routers I had to buy a new WRT54G then the radio worked just fine. A lot of owners report having wifi connectivity problems with the RIR200 and that must be the reason why. The radio uses vtuner.com and rcainfiniteradio.com to get it's list of stations, not Reciva like a lot of other radios use. Vtuner doesn't quite have all the stations that Reciva does but generally works well and new stations can be added. You can go to Vtuner.com and try it out for free if you want to see if it gets your favorite stations or the kinds of music you like. You can also store Favorites that you listen to frequently but they go to the RCA website so the radio depends on being able to access a third party website everytime it does anything unlike some other models that store favorites locally in the radio's memory. This generally works well but can be a problem if the RCA or Vtuner websites are down for maintenance or unreachable. Also, since RCA sees everything you listen to they could possibly spy on you and keep a list of your radio listening habits. That could be a problem for owners who live in areas where the government considers some stations to be subversive.
This radio is made by Audiovox and sold as the Audiovox in Europe and as the Acoustic Research ARIRC200 in Canada. There is a Google Group for the Canadian version called "Acoustic Research ARIRC200 Internet Radio" that has discussions of that version. There are a lot more reviews of the RIR200 on Amazon listed as product B0016OK5O0. If you search for B0016OK5O0 you can find them.


Click Here to see more reviews about: RCA RIR205 Infinite Radio Tabletop Internet Radio with Wi-Fi Enabler (Black)

Listen to thousands of global music and talk stations with the RIR205 Infinite Radio by RCA.You can listen to web-only streams, as well as AM/FM transmissions broadcasted over the internet from all over the world.Radio includes a WiFi enabler that easily connects to your home modem or router with a standard Ethernet cable.The radio then creates a wireless internet link to the RCA internet radio.The WiFi enabler provides a quick and easy wireless setup option right out of the box.If you are using the radio where WiFi is unavailable, you can simply plug an Ethernet cable from your modem or router to begin listening.You can choose from several audio sources including internet radio stations, local AM/FM stations, radios internal memory, USB input, or Slacker personal radio.Slacker personal radio is an internet radio service where you can create personal custom stations.Using Slacker you can tag the songs you love or ban the songs you dont.Slacker will then customize the music you listen to with every input you make so that the music played is narrowed to your preferred tastes and genres.Slacker offers over 100 genre stations, 10,000 artist stations and millions of tracks.The Infinite radio has 6 preset stations per audio source so that you can conveniently and quickly find the stations you enjoy the most with the push of a button.Enjoy on-demand weather through Weatherbug, giving you one-day, three-day forecasts and emergency alerts.The RIR205 has 512MB of built-in memory so that you can record approximately 10-hours of your favorite music from the internet radio or FM radio source.Use the personal online portal to customize your internet radio.Selections are made on the portal webpage and auto-synced to the radio.You can store your favorite presets and genres or add our own stations and URLs.

Click here for more information about RCA RIR205 Infinite Radio Tabletop Internet Radio with Wi-Fi Enabler (Black)

Read More...

Cisco-Linksys PLEBR10 Powerline To Ethernet Bridge Review

Average Reviews:

(More customer reviews)As a networking "internals" guy, I was shocked to find that this product is fundamentally broken at the network layer.
What people are complaining about here is that the device suddenly stops working and must be unplugged and plugged back in again.
This is because the device is trying to be too smart, and is losing track of which power-line modules connect to which computers. Unfortunately, in doing so, it prevents the network-level broadcast facilities from working. The broadcast facility I'm talking about most (ARP, the address resolution protocol) would have automatically corrected the problem if the Linksys box wasn't so broken.
In essence, for all you tech guys and gals, is that a learning bridge should never "learn" the broadcast address.
If you have only PCs, and you load the Linksys driver, they do some magic to keep the devices from falling over dead... But if you mix in a non-pc (Linux, UNIX, Macintosh) using a hub off the end of your power-line device, you're guaranteed to be frustrated.
The symptoms are that some of the network works (whatever was working before the bridge tables got corrupted) and others stop working with no explanation. The box "selectively" forwards traffic, and becomes deaf to other traffic.
It's like being at a cocktail party, and having every third person not be able to hear you, and saying "Over here!" (as ARP does) doesn't help either.
Ugh. In my experience, this is somewhat typical of Linksys products... If you have a windows PC, you're fine. If you have anything else, they won't talk to you.
I switched to the Siemens power-line module, and it has been working just fine for me.

Click Here to see more reviews about: Cisco-Linksys PLEBR10 Powerline To Ethernet Bridge

The Linksys Instant PowerLine EtherFast10/100 Bridge offers a complete Internet connection solution for your home powerline network. The PowerLine Bridge makes sharing your broadband access easier than ever. Build a strong and simple-to-use home network by taking advantage of the most pervasive home networking mediumpowerlines.The PowerLine Bridge is ideal for users who already have a router. It can be plugged into an Ethernet port on a router to equip a network with powerline capabilities and take advantage of the routers features. The PowerLine Bridge can also plug directly into a cable or DSL modem to allow Internet access and data transfer rates up to 14Mbps over home powerlines.With the PowerLine Bridge, create a network in no time at all to share an Internet connection (a router may be required), files, and printers, or even play multi-user network games at blazingly fast speeds. Its easy, convenient, and cost-effective.

Click here for more information about Cisco-Linksys PLEBR10 Powerline To Ethernet Bridge

Read More...

GE TL96572 25 Foot Dual Jack Phone Cord Review

Average Reviews:

(More customer reviews)I bought this dual phone jack to plug into a Vonage phone adaptor/router Vonage VDV21-VD - Router - VoIP gateway - EN, Fast EN because there wasn't room for the bulky single piece splitter that I was using before. I needed to plug in my telephone and plug another line into my computer modem so I could use the computer dialing feature on my CRM software. (You click on a phone number and it dials the number and keeps track of the call)
This works just fine. I plugged the small end into the Vonage adaptor/router, ran it across the room to my desk and then plugged the phone cord into one of the slots and the computer modem into the other. It works just fine.

Click Here to see more reviews about: GE TL96572 25 Foot Dual Jack Phone Cord

10-22-2007 - Brand New Item. Description - GE TL26572 25-Foot Dual Jack Cord (White)

Click here for more information about GE TL96572 25 Foot Dual Jack Phone Cord

Read More...

D-Link DGS-1005D 5-Port 10/100/1000 Gigabit Switch, Desktop Review

Average Reviews:

(More customer reviews)I had been using the older 10/100 D-Link switch (DSS-5+) for over two years and never had any kind of problem. About three weeks ago, I wrote a review of that switch here and mentioned that I'd like to try the Gigabit version (this one). After thinking about it for a bit, and realizing how inexpensive these things are, I went out and bought it. Exactly as I said for the DSS-5+, this is a great little switch that's definitely worth the money. All the ports are in the back, the casing has a brushed aluminum look, and it's fanless. So, it's definitely possible to leave it sitting on the desk. Since the "switching fabric" supports 10Gb/sec, that means each of the five ports can carry their full 2Gb/sec (1Gb/sec each way) capacity without problem. The darn thing doesn't even get warm. Definitely a good buy (I rate it at 5 stars out of 5).
Darn near every computer sold these days has a Gigabit Ethernet connection built into it. So, assuming you have the proper cabling (Cat 5e or Cat 6), using a Gigabit switch should let you take advantage of the added speed on your local network. However, it won't make any difference across the Internet since only a rare few cable modem even connect at 100Mb/sec and, as far as I know, none connect at 1 GB/sec.

Click Here to see more reviews about: D-Link DGS-1005D 5-Port 10/100/1000 Gigabit Switch, Desktop

D-Link (DGS-1005D) SWITCH 5-PORT 10/100/1000MBPS

Click here for more information about D-Link DGS-1005D 5-Port 10/100/1000 Gigabit Switch, Desktop

Read More...

Linksys by Cisco WPC54GS Refurb Wrls-g Notebook Adr Spdbstr No Rtns Review

Average Reviews:

(More customer reviews)First of all, it is version 1.1 and the latest version is 3.1 so it's obsolete. Second of all, it produced an error message the first time I installed it, and a different message other times that I reinstalled it. Here is an example:
The drive or network connection that the shortcut "wireless G Notebook Adapter Utility.Lnk" refers to is unavailable. Make sure that the disk is properly inserted or the network resource is available, and then try again.
Sometimes the network connection that it created said that the network cable was unplugged. This is supposed to be a wireless connection, duh.
The only instructions for installing it are on the CD and they are different from the instructions on the [...] website. However, I could never make it work. I downloaded new installation instructions and driver from the web site but it never worked. Whenever I tried to install a new driver version, I got the blue screen of death referring to the bcmwl5.sys file (the driver).
Purchased from Amazon.

Click Here to see more reviews about: Linksys by Cisco WPC54GS Refurb Wrls-g Notebook Adr Spdbstr No Rtns

IMO LINKSYS WPC54GS REFURB

Get 15% OFF

Click here for more information about Linksys by Cisco WPC54GS Refurb Wrls-g Notebook Adr Spdbstr No Rtns

Read More...

Linksys Wireless Internet Camera with Audio Review

Average Reviews:

(More customer reviews)I purchased two of these cameras. They are new to the Linksys product line. They are not inexpensive. However, compared to all the other wireless-g cameras available, these are good and reasonably priced. (Note, I had tried another brand of wireless-g camera, and had written a review on it. I returned those cameras.)
The cameras support WEP or WPA security (I am using WEP), are good in low light conditions, are sensitive to infrared illumination, can be accessed from anywhere I have access to the internet, and have remotely controlled Pan and Tilt. I have had them for 1 month, and I like them. Kudos to Linksys.
A word of CAUTION, I have not seen any wireless network camera that is "plug and play." And if you have a wireless router, firewall, wireless security, cable modem, etc., it gets more complicated. That is just the way it is right now. For this price range, no manufacturer can afford to give you tech support, other than for the basics. And for networking, there are very little "basics."
The manual is decent (79 pages.), but could use more information. However, you still will need some knowledge about setting up network adapters, especially if you are using a different brand router (which I am.) With some knowledge, it's going to take at least an hour per camera (probably several hours for the first camera, if this is your first time setting up an internet camera.) With little or no knowledge, you may not want to bother. I can be very frustrating.Pros:
-- Can access the camera wirelessly (within your network) and through the Internet (within or outside of your network.) I am using DynDNS for access from outside my network. Your browser must support ActiveX (currently, works best with Internet Explorer.) Linksys also provides monitoring software for access outside of your browser (but it doesn't work.)
-- Moving the camera to other locations (within your wireless network) is easy. Just unplug, move, and replug into AC outlet.
-- Has nice features regarding IP assignment, email alerts, motion detection, etc. I have tried all these features and they work well. Motion detection requires some tweaking so that it isn't constantly picking up motion. When away, I get an email with a 5 second video clip whenever motion is detected. (This can be as little as 2 seconds, or no video clip at all, just an email alert.)
-- Good image quality. Quality depends upon compression settings (the camera is transmitting images digitally, adjustment may be necessary to minimize the volume of data being transmitted [bandwidth].) Webcams don't have the same bandwidth constraints, since they plug right into your computer, so there quality tends to be better. The camera has adjustable framerate and quality settings.
-- Fair color quality. I don't believe this is a serious issue for security. Black and white is still predominantly used for security. Part of the lack of color quality (or accuracy of color) is the camera's infrared sensitivity, which is a plus. However, if security is a serious issue, there might be better choices for surveillance.
-- Decent low light sensitivity. The camera's infrared sensitivity makes the camera more sensitive in lower light incandescently lit areas. If you can read under the existing light, you will get a very good picture. (For viewing under dark conditions, you would need to supply your own infrared lights.)
-- Motion detection with email alerts. Works well when set up properly.
-- Good fixed focus. Camera focus can not be changed, however, the images appear clear under most conditions. (The ability to manually focus on a remote camera is not a feature that is easy to do. There is no viewfinder on the camera! Remotely focusing cameras are expensive.)
-- Multiple indicator lights and LCD address display on the camera, in case you forget what IP address your camera is assigned to. These lights and display can be turned off remotely.
-- Remote pan and tilt. Works well. The motor is a little noisy. But for the price...
-- Can use a Dynamic DNS (DDNS) service other than SoloLink. I am using DynDNS and I have DDNS and a cable modem and a non-Linksys wireless router. Again, you need to know a little about networking. Cons:
-- Setup is complex. This is probably an issue with any wireless camera. Setting up access, in particular from outside your network, is a complex process. Going from wired to wireless is particularly complex. The initial setup does not include all the options available when you access the camera remotely. So, you can't do a complete job during the initial wired setup (particularly with setting fixed IP addresses and port assignments.)
-- Camera is not small (like webcams.) With the motors and dome, I understand this is the best functionality you probably will get for the size and price. Smaller cameras require smaller motors, etc. and that would cost more.
-- The stand the camera sits on is flimsy; the camera just sits on it. I am surprised there is no snap/lock (or whatever) to hold the camera to the stand. It would not have cost any more. However, there are mounting holes and a tripod socket on the camera.
-- Monitoring software, for access without using your browser, has problems. I was only able to get it to work on one of three computers I installed it on. Linksys has not been helpful. This software is required for viewing multiple images at once and provides a recording capability. One can view multiple images with your browser, but you need to open up more than one window on your browser and then try to arrange them.
-- Accessing the camera wirelessly through the Internet can be a problem if you don't have enough bandwidth (internet speed.) Also, some corporate firewalls won't let you through.
-- Camera antenna is very directional. Requires careful adjustment in some locations in order to access it. The worst position is upright (vertical) as shown in all the pictures!
-- No useful online help or forums. My guess is that camera is still too new.Other:
-- I have had both my cameras plugged in (AC power) for days with no need to reset. When I first installed my cameras, I unplugged them more frequently to reset. (There is a reset hole on the bottom of the camera; but unplugging is easier.) I don't have a conclusion.


Click Here to see more reviews about: Linksys Wireless Internet Camera with Audio

Wireless-g ptz internet camera with audio mpeg-4 640x480.

Click here for more information about Linksys Wireless Internet Camera with Audio

Read More...

SMC2655W 802.11b 11Mbps Wireless Access Point Review

Average Reviews:

(More customer reviews)I have purchased Linksys products in the past and other than the fact that it took 3 tries before I finally received a working DSL/Cable Router, I have always been pleased with the performance but the technical support was a complete joke.
I decided after reading the reviews on Amazon.Com and other sites that I would spend the extra $10 and go SMC because of it's ease of installation and tech support.
I purchased the Linksys PCMCIA card as part of my wireless solution and it took less than 5 minutes from opening the box to surfing on the web to get it and the wireless acces point up and running. The speed performance is beyond expectations. I have the basic cable modem attached to a Linksys DSL/Cable router and plugged the SMC Wireless hub into one of my available Linksys ports and that was it.
I made the choice to go the SMC route after vowing never again to deal with the inept "Hope Desk" offered by Linksys. If you had any thoughts about buying Linksys, think again. SMC is THE way to go.

Click Here to see more reviews about: SMC2655W 802.11b 11Mbps Wireless Access Point

The SMC 11 Mbps wireless Access Point is designed for both business and home users, with a maximum operating range of 1,800 feet.It acts as a bridge between the wired network and the wireless clients.The Wireless Access Point enables the desktop wireless PCI card users and the laptop wireless PC card users to obtain seamless network connectivity.

Click here for more information about SMC2655W 802.11b 11Mbps Wireless Access Point

Read More...

D-Link DE-805TP 10Mbps Ethernet Mini Hub 5-Port Review

Average Reviews:

(More customer reviews)Look -- I don't need a great hub. Obviously, this is definitely NOT something you'd want to support a major corporate network. When it comes to inexpensive home networking, though, this product is everything you'd ever need. Our 3-computer home network has never been jammed, we have never experienced any difficulties with the hub, and setup was a complete breeze. Just make sure you buy the right cables for the job (there's yellow patch cables, and regular ethernet cables -- talk to your local computer store representative to sort out this issue.. they'll know). I personally knew nothing about home networks before I decided to set up my own, but all in all I'm definitely glad I decided to use this inexpensive option to set up our network. You'll definitely appreciate the nice light up LED's which tell you when and where data is being transferred. Did I mention we even use the hub to give cable modem access to all 3 of our computers, with only one actual cable modem? Isn't that great?

Click Here to see more reviews about: D-Link DE-805TP 10Mbps Ethernet Mini Hub 5-Port

The DE-805TP is a five-port 10Base-T Ethernet hub that is ideal for very small workgroups on unshielded twisted-pair cables. This IEEE 802.3 compliant hub provides five RJ-45 ports for normal connection to stations and/or for cascading to another hub to increase the number of ports on your network. It comes with LED indicators for power and collision, plus one for each port to monitor the network activity and the link status between the port and the connected station. Lightweight and compact, this hub can be installed almost anywhere, even at sites with limited space.

Click here for more information about D-Link DE-805TP 10Mbps Ethernet Mini Hub 5-Port

Read More...

NETGEAR SPH200W WiFi Phone with Skype Review

Average Reviews:

(More customer reviews)This review concerns only the SPH200W; I don't know anything about the earlier SPH101.
I was hesitant to buy this product based on reviews, but I went ahead and got it, expecting to have to do some troubleshooting.
The product has been completely satisfactory to me. The phone is adequately sturdy, battery life is quite long long (I power the phone down when I'm on the move to keep it from searching for networks, and I get 3-5 workdays of standby out of one charge), and call quality is fine. Incoming call clarity is superb; outgoing clarity isn't always great because of the mic placement and quality on this phone. Setting up the phone is easy and intuitive. The phone connects quickly and reliably to networks, and options for preferred networks, entering passphrases, etc., are many and easy. Making calls is very easy. As is clearly indicated on this product's box, there's no onboard web browser, so you can't authenticate on a network using a browser. If you just have to register hardware on a network you use (like I do at work), that's easy - use your computer to register, or just tell your IT person the MAC address of your phone, which is under the battery.
You can charge the phone using the included cradle which receives a male USB mini-A plug, or you can plug a USB mini-A cable directly into the phone. Netgear supplies you with an AC adapter which plugs into the wall and terminates with mini-A, so you can charge this phone like you would any mobile phone. There's also an A- to mini-A USB cable in the box, so you can charge from your computer if you need to. Both methods work with either the cradle or without it. Very versatile charging options.
Here's what I think will be useful to potential buyers -
Netgear's support is mediocre at best, and I couldn't get any info. from them about compatible headsets or batteries. Don't buy this phone expecting excellent support from the manufacturer. I did some legwork, and much research later, I have answers:
"Standard" headsets don't work with the SPH200W. You need a 4-pole plug, to start, and then not all headsets of this description will work. Nokia headsets have worked for me - I bought an HS-47 for peanuts, and it works great. This significantly improved outgoing call quality.
Batteries. No help from Netgear on this one, I'm sad to say. The battery for the SPH200W is lithium, 3.7V, and has 900mAh capacity. If you search for batteries which are interchangeable with Nokia BL-5C, you'll find one which will work. The Netgear battery is the shape of the BL-5C, and many BL-5C replacements are 3.7V (vs. 3.6) and some are higher capacity than the stock one (Lenmar makes one which is readily available and works very well with this phone). If you absolutely must have tons of battery life out of this appliance, get an extra battery and you'll be good to go for a long long time.
Other complaints of others:
1) "the speakerphone isn't hi-fi." It's true. Have you heard high-quality sound from a mobile phone's speaker? I never have. This works just fine; I can understand what callers are saying when I use the speaker. I don't listen to lossless audio playback on my phone.
2) "outgoing call quality is poor." Not quite true, though this is the SPH200W's weak point. It's often just as clear as a digital/cell connection, but sometimes it's obscured enough to be annoying. If you want to upgrade, spend a few bucks and get a good headset. If this still doesn't satisfy you, wait for the next generation of wi-fi phone technology.
3) "battery life is terrible." Not true. If "less than 9 days of standby" is "terrible," then I guess I can see what folks are saying here. You get plenty of talk/standby time out of this battery, and it's very easy to keep it charged up with all the options you have. Extra batteries are also easy to come by.
I'm glad Netgear is producing VoIP equipment. This is a good piece, and I recommend it to anyone who is weaning him/herself from a 2-year wireless contract.

Click Here to see more reviews about: NETGEAR SPH200W WiFi Phone with Skype

Unlimited Free Wireless Calls to Skype Users, Without a PC. Make and receives Skype phone calls wherever you have Wi-Fi access. Works with most leading Wi-Fi hotspot providers including T-Mobile USA. Lets you talk for free to other Skype users without a PC. Calls any phone worldwide at low SkypeOut rates and NO MONTHLY FEES. Works with security protected home WiFi networks. The SPH200W is compatible with leading hotspot providers that support the WISPr (Wireless Internet Service Provider Roaming) protocol, including T-Mobile USA. A list of WISPr hotspots can be found at www.netgear.com/hotspots. NETGEAR neither operates nor guarantees the continual availability or compatibility of Wi-Fi hotspots. Subscription or usage fees may apply for Wi-Fi hotspot usage. Wi-Fi hot-spots requiring browser-based authentication are not supported. For calls made through Skype and/or the SkypeOut service. Terms and conditions of the Skype services are subject to change at any time in the sole discretion of Skype Limited. The Skype service is offered and operated solely by Skype, and NETGEAR does not guarantee Skype service availability, quality or pricing. No emergency callingemergency calls will need to be made by alternative methods. This phone will not function during a power failure or broadband outage. Use of Skype software, SkypeOut and/or SkypeIn is subject to Skypes terms of service and end user license agreement.

Click here for more information about NETGEAR SPH200W WiFi Phone with Skype

Read More...

Cisco-Linksys WGA11B Wireless-B Game Adapter Review

Average Reviews:

(More customer reviews)Okay, first of all I'm hot on linksys (see my other reviews). I used to do network stuff for a living - don't anymore, but I have always been impressed with Linksys (compared to Netgear, DLink and Microsoft) for the consumer market. Their stuff is by and large (prosumer) - it has some good pro features without having to be a rocket scientist to configure the thing. Now that Cisco owns them - it's even a better deal as Cisco has been putting some nice features into all of linksys's products. While the tech support guys at linksys all need an attitude adjustment (they are a surley bunch) - the products often don't require tech support... so I suppose it is a good-news, bad-news, kind of thing...
But this sucker was PLUG AND PLAY for all intensive purposes. There are a few things, however, I think people should know in order to set this up:
a) You probably want to turn off all WEP and MAC filters. You can turn them back on once you get the sucker id'ed on the network and talking... but for now, leave it off.
b) You probably want to turn ON your SSID (again, makes it easier for the thing to install out of the box.)
c) You probably want to know what your broadcast frequency is on your WAP. If you are using a linksys WAP it is found on the admin screen regarding security. You need to look for the broadcast ID channel (default is six). That is the channel you want to tune the WGA11B. However, what I really recommend that people do is avoid "ad hoc" mode entirely and set the WGA to In mode (looks kind of like 1n on the WGA display) - this is infrastructure mode. Infrastructure mode is what you want to use if you are using a broadcasting router/switch/bridge access point (like the linksys Wireless-B, G, WAP11, etc.)
d) Make sure you know what type of cable you are using to connect it. The cable that comes with the broadcast bridge unit (the WGA) is actually a CROSSOVER cable. This was a bit surprising to me (not that they are hard to make, just, you rarely ever get one from someone - you always wind up making them). You'll know you have the switch in the right position when the WAN light (the little symbol that looks like a circle with two lines in it) lights up GREEN.
e) If you are not already, I'd set up DHCP for the moment. The bridge is default configured to try and connect via DHCP. If you don't have DHCP configured, I don't know what it is going to try to do default IP static (probably 192.176.1.1 if it is like other linksys products). Save yourself the headache and do DHCP.
Okay - otherwise, this sucker is easy as pie to set up. Plug it in to your LAN adapter (I have PS2 so it is a little box on the back of the game thing - don't know about Xbox). Then plug the cord into the WGA. Turn the WGA on and set it to the channel of your WAP. It should start talking IMMEDIATELY. If not - you have done something wrong.
The CD for the PC is interesting. Like most linksys products - it looks nice and is full featured. You won't need the CD for configuring the WGA unless you plan on using WEP.
The infrastucture mode is really fast. I must say that I play online alot.... and this connection point on PS2 shows virtually no lag. I don't know what Sony did via their gaming networks - but this sucker runs QUICK. Like I said, virtually no lag.
The real bummer is that about 99% of the games out there are not multiplayer yet. The ones that are, however, are really fun to play. I play MOH:RS, Desert II, and a few others online. The games are quick paced. To really take advantage of it, however, you might want to go "full bore" and invest in a USB headphone/mic set so you can "talk to people". Also, the USB keyboard might be a nice feature too... although I don't have that...
I've seen quite a few game adapters out there (do a search on Amazon - you will see). This is the best one I've seen for the money.
One last thing - I'd forget "Wireless G" adapaters. Again, unless your connection is like a T3 line straight to the house (which 99% of most people do not have) - you're only as fast as your smallest connection - which is likely to be the ADSL/Cable router connection. Comcast is 3MB - which I NEVER get (even burst inside Comcast's net). So B is MORE than enough bandwidth. I heard some guy at Best Buy trying to talk up a Wireless-G adapter saying he would get "better performance" - and while that is true.. it's like putting brand new wheels on a car with an underpowered engine... yeah, it will look better... but it won't go faster.
See you out there...

Click Here to see more reviews about: Cisco-Linksys WGA11B Wireless-B Game Adapter

The LINKSYS WGA11B Wireless-B Game Adapter gives any wired Ethernet equipped game console wireless connection capability. If you have an existing home wireless network with a cable or DSL Internet connection, the Game Adapter lets your PlayStation, XBOX, or GameCube attach to the network so you can get into online games without running wires to the game room. Or, you can use a pair of Game Adapters to form a "cable-less cable" between two game consoles for head-to-head gaming -- in the same room, or all the way across the house!

Click here for more information about Cisco-Linksys WGA11B Wireless-B Game Adapter

Read More...

Panasonic BL-PA100KTA Ethernet Adaptor Starter Pack Includes two HD-PLC (High Definition Power Communication) Review

Average Reviews:

(More customer reviews)I researched competing products from DLink and NetGear online and read numerous reviews. Any of the HD-PLC products should perform similarly in the same situation. Before deciding on a powerline Ethernet product be sure to understand that the quality of your home wiring and the distance the signal must travel all can affect the performance of the product. Poor quality wiring or very long electrical runs may limit performance.
What I liked most about the Panasonic product is that the kit which includes two units is preconfigured, so it works right out of the box without any special configuration. I didn't have to install ANY software to get my network running. I plugged in one unit to my Internet router, and the other unit into a power outlet in a nearby office. Once I connected the Ethernet cable, I was up and running. It was really that easy.
One nice thing with this unit is that you can run a speed test from the unit itself, with the front LED's displaying the estimated network performance. This was handy as I tried different outlet combinations to acheive the best performance. As a side note, I found that plugging the "Master" unit into an outlet as close as possible to the breaker box yeilded the best results. By putting the master as close to the break box as possible (electrica wiring distance) I was able to get a much better signal. I have the master unit in a downtairs room that is about 40' from the breaker box, and the secondary unit in an upstairs office that is about 65' feet from the breaker box.
Note that any powerline Ethernet product is susceptible to interference from other devices. Pay attention to the manual regarding the types of devies that can cause interference, and avoid ever pluggint the device into a surge protector, since that will greatly limit performance.
An additional nice feature of the Panasonic unit compared with DLink and NetGear is that the unit has a power cable. This allows me to plug it into "hidden" outlets, and then place the box in an easy to reach location. Both the NetGear and DLink products are a box that plugs directly into the outlet. This makes them more difficult to access, especially if you want to look at the box to see what it is doing. I like that the Panasonic can sit nicely on the corner of my desk and I can see the lights. I also suspect that the Panasonic will operate cooler since it can be placed in locations where there is air flow all around the unit.
Performance will vary by house and situation. I have a gigabit network switch that connects my machine directly to a server. When I copy a 50 megabyte file to my server using Windows XP, it takes 8 to 9 seconds to copy a 50 megabyte file. Running the same 50 megabyte file copy to a machine on the HD-PLC network connection took about 27 seconds. This seems to be pretty good performance overall. Note that "speed test" is only as good as what is being tested. My test was a real world test under Windows XP copying a 50 megabyte ZIP file.

Click Here to see more reviews about: Panasonic BL-PA100KTA Ethernet Adaptor Starter Pack Includes two HD-PLC (High Definition Power Communication)

The HD-PLC (High Definition Power Line Communication) ethernet adaptor makes it possible for your home electrical wiring to serve as a link between your PC and modem. Getting online access is as easy as plugging into a power outlet. You can move your PC and connect to the internet anywhere there is a power outlet in your home!

Click here for more information about Panasonic BL-PA100KTA Ethernet Adaptor Starter Pack Includes two HD-PLC (High Definition Power Communication)

Read More...

Cisco-Linksys WMP11 Wireless-B PCI Card Review

Average Reviews:

(More customer reviews)I bought this card last December. Opened my desktop PC, installed the driver, put the card in one of the PCI slots, had the desktop connected to the network in less than 20 minutes. Then I spent the next 7 hours trying to get good, reliable wireless connection.
The major complaint I have with the card is that the Linksys should have separated the antenna from the card and allowed users to put the antenna somewhere else via a cable. With the antenna mounted on the back of the card directly, it is completed shielded by the PC's metal case, which makes the wireless transmission and reception poor. With all the cables and connectors in the back of a PC, it also makes it hard to adjust the antenna at all (I had to move the wireless card up and down the slots to find the optimal location). My wireless AP was only about 60 ft away and I was only getting 20 - 30% signal strength and link quality. From time to time it would lose the connection completely. Linksys should really have thought through this antenna issue. After all the hard work and time spent, I finally got the optimal antenna position. I am now getting 40 - 60% of signal strength and link quality. It now runs reliably at 11 mbps speed.
The second problem I had was that this card interfered with my daughter's favorite music player Winamp. Whenever she played music using Wimapm, the wireless card would lose connection and stop working completely. This problem was fixed after I downloaded the latest driver and firmware for the card. Not sure if this is related to the Creative sound card interference problem reported by another review. My desktop does have a Creative sound card.

Click Here to see more reviews about: Cisco-Linksys WMP11 Wireless-B PCI Card

The Linksys WMP11 Instant Wireless PCI Card sets you free to work your way, from wherever you want. Put your desktop computer anywhere you like. The Instant Wireless PCI Card lets you share printers, files, and more within your wireless LAN infrastructure, increasing productivity and keeping you on the network.Fully compatible with IEEE 802.11b standard, and interoperable with DSSS 2.4GHz compliant equipmentCapable of up to 128-bit WEP encryptionFree Technical Support -24/7 for North AmericaOne Year Limited WarrantySystem Requirements -Pentium 90+ class processor16MB+ RAMPCI local bus 2.1 compliantWindows 98SE/ME/2000/XP

Click here for more information about Cisco-Linksys WMP11 Wireless-B PCI Card

Read More...

Ooma Core VoIP Phone System Review

Average Reviews:

(More customer reviews)I have been a Vonage customer for three years and suffered through all of their growing pains. At $25 a month though for unlimited service I thought I would check to see what other options were available and decided on giving Ooma a try.
The Ooma hardware is well designed, with thoughtful touches like a built in speaker for listening to voicemail and a brightness control so that you can turn down the brightness of the unit in a bedroom. The hardware comes wonderfully packaged like a product from Apple and includes just about any of the cords you might need to get everything connected with your existing service.
Setup was quite easy. You have to get online and activate the Ooma Hub unit by entering the MAC address on the bottom of the unit and telling Ooma what kind of service setup you are doing, such as whether you will use Ooma with an existing line, get a new phone number, etc. They don't even need your credit card and you are activated.
If you are getting a new phone number then you are essentially done at this point. You get a new phone number to use, and you connect the Ooma hub to your home network. Ooma recommends you put the Ooma hub between your Cable or DSL modem and your home router (if you have one). The reason for this is that it allows the Ooma unit to manage your outbound internet traffic and make sure your phone calls are optimized ahead of other traffic, so that phone calls always have priority, sound good and work properly.
If you have a more sophisticated home network router than can do traffic shaping, recognition of IP audio, etc (some of the top of the line D-Link models have these "QoS" features built in) then you can simply plug the Ooma hub into such a router and get good results.
After plugging in the Ooma to your home network you simply connect a home phone to the Ooma unit and you are pretty much ready to go. There is an "ooma music" dial tone you will hear when you make or receive a call. This is one of the ways Ooma lets you and others know you are using their system and is sort of a free advertising that lets people know you are using this service.
You can plug the Ooma hub back in to one of your home wall jacks and then connect the Ooma scout unit in to another jack in the house so that you can use a 2nd phone there. The scout can even be configured to only ring on a 2nd line, have it's own voicemail, etc... this is possible because the Ooma hub has a built in DSL network system in it that allows it to communicate with the scout units over your home phone wiring. This is very sophisticated compared to other VoIP vendor offerings. You can add up to about 20 scouts on the system and keep adding lines, etc, but obviously there are bandwidth and practical limits that you might run into in such a scenario.
If you are porting a number things get a bit more complicated. After indicating I wanted to port my number I was informed on their website that I needed to call them to complete the porting process. The agent I reached was a bit confused and kept insisting I should just use my existing phone service with Ooma. About the 3rd time of telling him I just wanted to get my number ported he got the paperwork started up. They email you some forms a few days after activation that you need to fill out and fax in to get your number ported, which takes a few weeks. In the interim you are assigned a temporary number to use and you can plug your existing line into the Ooma hub and it will take your inbound calls and route them through the Ooma system. There is a $40 charge for porting your existing number but Ooma will waive this fee if you sign up for the $99 premier service that includes a 2nd phone number plus additional features. Ooma advertises that you can keep your original home service as a backup line, so that your phone works even if the Internet is down, but in my experience Internet service is at least as reliable as my old school home phone line. Anyways, it's your choice.
In my case I elected to port my number, but didn't connect my old line to the Ooma Hub (as the agent insisted I do), I simply forwarded the number to the temporary phone number that Ooma assigned to me during the porting process.
Ooma offers a full suite of software features such as "simulring" (ring a cell or 2nd line at the same time your Ooma phone is ringing), magical "2nd phone line" from another phone on the system when the 1st line is busy, etc. You can control your entire Ooma system from the "Ooma Lounge" which is basically a web page you can access from anywhere that lets you control your Ooma system, features, additional numbers, caller ID, etc. You can learn a lot more about these features on Ooma's website so I won't go into them in great detail since this review is long as it is.
Sound quality on the Ooma is very very good. My mom who is used to hearing me talk on my Vonage line immediately noticed how much better the service was. Sound quality should be excellent provided you connect the Ooma equipment properly.
I would strongly recommend this service to anyone with even a basic technical ability. If you simply need the "basics" of phone service such as call waiting, caller ID and voicemail, Ooma will be a one time purchase. Their premium services are also very nice and reasonable at only $99 a year (sure beats paying Vonage $300 a year for similar features).
One question that keeps coming up is how Ooma can make money with this model. The answer is that Ooma makes money when you buy the system hardware and also makes money when you subscribe to the $99 premium service. There's no saying that they won't increase the price of the premium services at some time in the future. Also, I wouldn't be surprised to see Ooma come up with new tempting hardware offers down the road such as better "scout" and "hub" units that offer features such as video calling between Ooma subscribers.
I am a voice over IP engineer and can certainly recommend the Ooma service, it's a great option compared to spending $30-$60 a month for basic phone service with your local phone company. Ooma supports E-911 for emergency calling, and if you are really worried about having a phone line during a power outage simply connect your cable modem, Ooma Hub and cordless phone system to a UPS Battery Back UP and you will have power for at least an hour during a power loss since all those devices will be running on battery.
I highly recommend this product and the model that Ooma are starting to put together to move beyond the "bell head" phone system that we all grew up with.
12/16 update//
I wanted to provide an update to my review and answer a few additional questions. My number port was completed by Ooma almost exactly three weeks after the request which is fantastic. When the porting request is completed you start to log into the Ooma Lounge with your "real" phone number versus the temporary one that Ooma assigns to you.
I had no issues setting up my 2nd line either. Simply select from available numbers in the area code of your choice and tell Ooma how you want the call handled when it comes in (if you want it to ring to a particular hub/scout, have its own voicemail, etc). Now on to a few questions and/or mis-information I have seen about the Ooma system.
1. I have seen a lot of posts comparing Ooma to Magic Jack. There is no comparison. Magic Jack is a USB adapter that requires a PC running 24/7 to handle your phone calls. PC crashes, no phone. Want multiple lines/scouts... too bad. The Magic Jack is a toy compared to Ooma. Additionally Ooma's basic features are far superior to Magic Jack and requires NO FEES! With Magic Jack you do have to pay annual fees for unlimited calling. So Ooma will actually be cheaper in the long run for most users!
2. I have also seen reviews indicating that Ooma works well, but choppy voice is experienced when using the Internet. This is caused by incorrect installation of the Ooma hardware. Ooma hub must be installed BETWEEN your cable modem and your home router or it cannot prioritize your telephone calls for good quality! The only exception is if you have a home router that prioritizes your voice traffic, such as some higher end models. If in doubt you must put the Ooma directly behind your Cable or DSL modem to get the optimum performance!
3. I have also seen people comment that you can't use multiple phones with the Ooma system. This is only partially correct. If you want to use scouts and the features they offer (have a 2nd or 3rd number ring in to a scout, etc) then yes, you would need a scout for each phone you want to use with Ooma. However, if you just want a "shared line" (like regular home telephone service) then you can simply plug your Ooma Hub into your home phone jack and plug in as many other phones as you want. This will prevent some of the advanced features from working, but will basically work like a Vonage system, etc. Obviously many people have multiple handset wireless systems these days so they will just plug their wireless base station into the Ooma Hub and use scouts for other phones.
4. Someone asked me the question if I work for Ooma since I've commented in many reviews. The answer is no, I don't work for Ooma but I am a very satisfied customer and a voice over IP engineer with 13 years of industry experience. Ooma is the best residential voice over IP system I've ever seen and I very much would like them to succeed and offer their superior service for decades to come. The only way this will happen is with strong word of mouth advertising from professionals such as myself!
2/28 update//
There have been numerous questions...Read more›

Click Here to see more reviews about: Ooma Core VoIP Phone System

In a volatile economy, there's one utility you can save with the aid of VOIP technology - your phone service costs. Smart and stylish, the ooma Hub and ooma Scout partner with your high-speed Internet and your existing home phones to deliver free home phone service. Your one-time purchase eliminates monthly bills for U.S. calling and delivers extremely low rates for international calls. Your one-time purchase of an award-winning ooma Hub device frees your phone service. Call anyone, at any number, anywhere in the U.S. without charge. Think how much you pay the phone company each year. Now imagine what you could do with all the money you save. Ooma is the only company in the history of the telecom industry that lets you own your dialtone. Your one-time ooma purchase eliminates monthly charges for unlimited US calling. Compared to other stand-alone VoIP providers, there are no monthly fees for US calling. Plus, the ooma system has been architected to deliver exceptional voice quality and reliability, giving you the crisp, acoustic performance of a landline, without the associated fees. A number of our customers have reported that ooma delivers "excellent voice quality," "better than landline." Easy-to-read manuals are full of colorful diagrams and simple instructions to make set-up as painless as possible. It takes the average customer less than 20 minutes to activate and install the ooma system. Using the ooma system is even easier! ooma devices have been designed to provide an intuitive out-of-box experience. Ooma can move your number from your current phone provider for a one-time fee of $39.99. To use the ooma Hub device, you need TWO things: 1. A high-speed Internet connection (cable/DSL/fiber-optic); and 2. A home phone. Try out ooma's enhanced calling features with a free trial of ooma Premier, which includes a free second phone line, real-time message screening, one-touch Do Not Disturb and Send to Voicemail, a second personal number with private voicemail, and more.

Click here for more information about Ooma Core VoIP Phone System

Read More...

Cisco-Linksys EFAH05W EtherFast 10/100 5-Port Workgroup Hub Review

Average Reviews:

(More customer reviews)I bought this hub a while back, and it has been working great ever since. I've been using it with my DSL modem to share the connection with multiple computers.

Click Here to see more reviews about: Cisco-Linksys EFAH05W EtherFast 10/100 5-Port Workgroup Hub

The EtherFast 5-Port 10/100 Auto-Sensing Hub from Linksys is the quickest way to build or expand a Fast Ethernet network. Each port automatically detects and negotiates 10 Mbps and 100 Mbps connections (dual speed per port). You can mix 10BaseT and 100BaseTX hardware on the same hub without using a switch or any additional network hardware. The EtherFast 5-Port 10/100 Auto-Sensing Hub is perfect for small workgroups interested in expanding as their networking needs grow. You can easily connect to other hubs and switches by using the shared uplink port. When all ports on the hub are running at 100 Mbps, the uplink port becomes capable of sending data up to 100 meters (328 feet) at a blazing 100Mbps.

Click here for more information about Cisco-Linksys EFAH05W EtherFast 10/100 5-Port Workgroup Hub

Read More...

Linksys SM01 Wall Mount and Stacking Bracket (package of one Bracket) Review

Average Reviews:

(More customer reviews)Had no problems for the most part with these brackets. Some reviewers were concerned about the brackets not fitting some linksys swithces and routers. This is true for the small ones like the EXXS88W 8-port switch. For those you have to use the little notches built into the bracket, which are not that deep and if your wall mounting the switch could fall off. For the larger Linksys routers like the WRT54G it works perfectly.

Click Here to see more reviews about: Linksys SM01 Wall Mount and Stacking Bracket (package of one Bracket)

Linksys SM01 Stacking/Wall Mount Bracket 10 Pack.

Click here for more information about Linksys SM01 Wall Mount and Stacking Bracket (package of one Bracket)

Read More...