Engenius Wl Acs Eoc-3220 EXT Outdoor 400Mw 54Mbps Extreme 5Dbi Omni Wall Pole Review

Average Reviews:

(More customer reviews)This is a great unit at a reasonable price. The competition is much more expensive.
The down side is that setup is a PITA if you are not a network administrator. Once setup though, the units work great. There is very little latency added (ping time round trip).
EnGenius ships with quite nice mounting hardware and POE adapter. You will also need some electricians tape to seal the RJ45 connection (unless you can attach your own RJ45 connector; the supplied gasket ASM isn't large enough to let the RJ45 through) and possibly a null modem DB9 cable assembly if you do like I did, and set the EnGenius in a mode where it won't talk to you anymore. EnGenius is running Linux under the covers, with the null modem cable you can reset to default using a 2nd PC.
My application is an interbuilding wireless link, LOS 350M (about 1100'), where it was not practical to run a wire for broadband access. The first units installed were the internal antenna 3220, which are still in production use working reliably in all weather conditions-- rain, snow, fog. Downtime is not an option as the broadband is work related.
EnGenius could help themselves a lot by having three or four "standard" setups shown on their web site (BTW, I recommend reading the EnGenius website FAQ). I ended up using the one configuration they listed although that is not ideal for my application-- mostly because I ran out of time to try to get the ideal setup working. In the setup used, the bridge end can't work with a router, only a switch, which is acceptable and certainly better than only 1 PC at the far end [the setup is DSL router, NetGear local AP/router, EnGenius 3220 set up as AP+WDS, EnGenius 3220 set up as bridge, NetGear FS105 switch. The ideal setup would have a router not a switch at the far end to support the 4 PCs there.].
The 3220 is pretty darn sensitive too. I can weakly detect (9DBi antenna) several unprotected APs in the distance through substantial tree interference-- I'm sure the AP owners "think" they are invisible because their laptops can't connect to their AP, well that is not the case and they should use WEP or WPA with SSID suppressed. The 3220 can also detect the head end AP buried inside a house (the NetGear AP/router feeding the 3220 at the head end). In some applications you may not need two 3220s to operate, just one, if the source low cost consumer AP can be placed in a window or other spot that provides a decent signal-- the weaker signal though translates to a higher error rate and slower overall communications (the communications is slower due to retrying when a packet is lost or mangled), there isn't any free lunch!
There isn't much competition at at the EnGenius 3220 price point. The units work reliably in all weather conditions and have a nice collection of mounting hardware and POE adapter. The EnGenius 3220 is an excellent solution to linking points if the alternatives are impractical or simply more expensive.

Click Here to see more reviews about: Engenius Wl Acs Eoc-3220 EXT Outdoor 400Mw 54Mbps Extreme 5Dbi Omni Wall Pole

1.Pushing outdoor range and functionality to its limits, EnGenius offers the latest in outdoor multipurpose Access Point / Client Bridge devices, the EOC-3220 EXT. The EOC-3220 series brings you the maximum range with its 400mW high wireless output power, and the flexibility you need for adaptable deployments such as industrial grade outdoor enclosure, antenna options, and 802.3af Power-over-Ethernet (PoE) certification. Features such as 802.1x, WEP, and WPA provide security. Experience the best in outdoor wireless connectivity today with the EOC-3220 EXT.2.400mW RF output power for greater range .5dBi removeable antenna, RP-SMA connector .802.3af PoE compatible for flexible deployment .802.11 b/g wireless Client Bridge/Access Point .IP67 rated enclosure for high resistance against dust, water, and weather conditions .

Click here for more information about Engenius Wl Acs Eoc-3220 EXT Outdoor 400Mw 54Mbps Extreme 5Dbi Omni Wall Pole

Read More...

Belkin F5D7132 Wireless-G Universal Range Extender Review

Average Reviews:

(More customer reviews)I have shared the same experience as the most helpful reviews here: this is a pain to install when you want to configure this Extender to be secure (so strangers can't mooch off of your internet or worse). On the other hand, once you have it set up, it works like a charm.
It's possible, but prepare to burn an hour or three. I would like to add some instructional steps, which are a variation of the very helpful ones already present here on Amazon.
Dummies Guide on How to set up the Extender with security turned on:
1. Completely ignore the instruction sheet that comes with the product. At first, I tried following it stubbornly despite reading these Amazon reviews, and I found that it is an embarrassment. Shame on you Belkin, for giving us so much unnecessary grief.
2. Find a computer in your home to use for this setup. Any computer (that isn't Vista) will do.
3. If this computer happens to be plugged into your router (I'm not talking about not the Extender), unplug it from the router. If this computer happens to have a wireless connection, disable the wireless connection.
4. Plug in the power cord for the Extender into the wall, then connect an ethernet cord (looks like a fat telephone cord) into the back of the Extender, then stick the other end into your computer. The "LAN" light will now light up. Just in case you're concerned, you can ignore the red "search" light that may blink.
5. Install the "Belkin Range Extender Utility" onto this computer. The installation CD will place a program in your Start->Programs menu once you run the install.
6. Go to start->settings->network connections. At this point the only enabled network connection should be Local Area Network (or Local Connection... the name may differ slightly for you). If anything else is enabled, disable it. Right click Local Area Network and select Properties. You're now looking for a new window to pop up that lists a bunch of internet-sounding words like Network or QoS. Look for the item called Internet Protocol (TCP/IP). Double click that.
7. Select manual IP, and enter 192.168.2.100
8. The subnet mask will get filled out automatically. Ignore the gateway. Hit OK, you're finished.
9. Start up the Belkin utility, and hit "refresh" if nothing shows up on the list of detected Extenders. If you're lucky, you will see the Extender show up, and you can now click "Web Management".
10. If no items show up on the Belkin Utility's list, or an item does show up but the "web management" icon is unclickable, then repeat steps 6-9 but enter the IP address 192.168.1.100 instead. Then the Extender should show up.
11. Finally, once you are able to click "Web Management", it will bring you to a webpage that is very much like a Router setup page. The details of what you need to do here can be found in instructional docs on the web elsewhere. The basic idea is that you want to copy pretty much everything over to be identical to what your router settings are. The only exception is possibly the SSID of the Belkin Extender. Depending on your preference, you may want to choose a different name for it just so you can confirm that its really working later on.
12. Save those settings (there's a systems tab at the bottom of the web management panel that allows you to save the settings into a file as a backup).
13. Unplug the Extender from the computer, unplug the power for the Extender, and move the extender to wherever you want. Plug the power back in.
14. Go back to steps 6-9. Remove the manual IP configuration for your Local Area Connection, and revert the panels back to the way they were (which is probably "automatically obtain ip address"). Hit OK. Enable all your network connections if you disabled them in step 6.
15. You should now be able to use your wireless connection to see the Extender under its fresh new SSID. Enjoy.
A version of the above for those that are network-saavy:
1. Disconnect all wireless from your computer, then connect your computer directly to the Extender as if it were a router. Power up the Extender.
2. Manually specify your computer's IP address to be 192.168.2.xxx with subnet mask 255.255.255.0. Yes, I know this step is weird. I'll explain the reason for it in step#4.
3. Install the Belkin Network utility. Its a simple executable. Start it up. It's purpose is to scan for the Extender, provided that your Extender is directly wired to your computer (which we did in step 1).
4. You should see your Extender show up in the utility. If the Extender does not show up or the "Web Management" button is greyed out, this is because your computer and the Belkin Extender are on different subnets. The Belkin Extender is usually shipped from the warehouse hardwired to the IP Address 192.168.2.254. What??? When you plug your computer into the Extender, you need to hardwire your computer to be on the same subnet so the stupid utility will work. Hence, since the factory setting for the Extender is 192.168.2.254, hardwiring your computer's IP to 192.168.2.100 will get the utility to connect to the Extender. However, if for some awful reason your Extender is hardwired to some other IP Address (which is configurable once you get to step#5), you need to change your computer's IP Address to have a value that matches the Extender's new subnet. In other words, if the Extender IP somehow changes to 192.168.5.254, you should change your computer IP address to 192.168.5.100
5. Once you click "Web Management" you can configure the Extender via a browser window. Replicate your router's settings here (they all need to match the original router's, with the exception of the Extender's SSID).
6. Hit Save, then unplug the Extender's power cord and ethernet, and then move it to wherever you would like. Power it up again.
7. Remove your computer's manual IP address. You're now officially done.
*As a note, I had occasional connection problems when I had my Belkin router & extender encryption set to WPA-PSK. I just switched my encryption to WEP and now it is fine. Not everyone has this problem.
Up this review, if you found it useful. I want to see other people spared from the excessive pain the rest of us have already experienced!

Click Here to see more reviews about: Belkin F5D7132 Wireless-G Universal Range Extender

SHARES DATA & PERIPHERALS AS WELL AS A SINGLE INTERNET ACCOUNT AMONG ALL COMPUTERS CONNECTS TO THE NETWORK SWITCH & JOINS WIRELESS-EQUIPPED PCS TO A WIRED ACCESS POINT NETWORK INCREASES THE COVERAGE OF EXISTING WIRELESS NETWORK OF UP TO 1500 FT STANDARD 802.11G54 MB RAMLIMITED LIFETIME WARRANTY

Click here for more information about Belkin F5D7132 Wireless-G Universal Range Extender

Read More...

Sony VAIO Wireless LAN Access Point Pro, 2.4 GHz (PCWA-A200) Review

Average Reviews:

(More customer reviews)Would have given it 0 stars, but obviously it's not available. This product is absolutely terrible. It does not work with even the Sony Wireless LAN Card. Had to return it and purchase the Linksys.

Click Here to see more reviews about: Sony VAIO Wireless LAN Access Point Pro, 2.4 GHz (PCWA-A200)

Access e-mail, the Internet, or your network wirelessly! The new Sony VAIO Wireless LAN Access Point lets you share files, drives, printers with one or more computers on your wireless network. Using any IEEE 802.11b industry-standard wireless LAN PC Card, you are assured of secure communication, high-speed data transfer rates and a range of up to 46 m (line-of-sight).

Click here for more information about Sony VAIO Wireless LAN Access Point Pro, 2.4 GHz (PCWA-A200)

Read More...

ZyXEL WAP3205 Wireless N access point, Ethernet client, and universal repeater Review

Average Reviews:

(More customer reviews)Once you have it setup it works flawlessy. Problem is setting it up for the first time. Documentation is not user friendly to the non-tech savvy. I'm using it as a wireless bridge / access point with my Sony blue-ray player. I already have a Linksys wireless router using WEP encryption (forced to use this because my XBOX 360 doesn't support WPA). To make it easy for others doing the same thing use the following steps:
1. Change your pc or laptop's ethernet adapter's IP address to 192.168.1.3 To do this on Vista or Windows 7 you open you network sharing center then you open your ethernet LAN adapter settings (or manage network connections in Vista). Select the Internet protocol v4 (IPv4) and go into properties. Manually put in the IP address with subnet mask of 255.255.255.0 and don't worry about the gateway address.
2. Connect your WAP3205 to your pc/laptop with the ethernet cable that is provided. Of course make sure you plugged in the power to it or your going nowhere. Open up your preferred browser (IE, firefox, netscape, etc.) and then type in the address bar 192.168.1.2 and now you will be connected to the WAP3205. Type in the default password of 1234, you are now prompted to change your password to whatever you want it to be.
3. Now that your in the WAP3205 click on Expert Mode. When in this mode on the far left you will see Status and below it Monitor, Configuration and Maintenance. Click on Maintenance and then hit the plus sign in front of Maintenance once you are in. Go to the last option of Sys OP Mode then select Client Mode and hit apply.
4. Go back to the far left and hit configuration then go to Wireless LAN. You will see tabs for Profile, Site Survey and WPS. Hit the Profile tab and then hit the Add button. Type in your network name / SSID and then select your security drop down box. Select WEP if you have a setup like me with the XBOX 360 or if you don't care about security select the no security option. Type in your passphrase that you use for your router's security or the actual 128 bit security code (or 64 bit if that is what you use) and hit apply. Then select your newly created profile and hit the activate button. If it's configured correctly you will get a green check. Now your done on this end.
5. Disconnect your WAP3205 from your pc/laptop and change your pc or laptop's ethernet adapter settings back to whatever it was before.
6. Go to your blue-ray player and disconnect the power cord for about a minute or more. Connect the WAP3205 to the blue-ray player with the ethernet connection and power your blue-ray player back on. The blue-ray player will automatically pick up the network settings from the WAP3205 and you will be done.
Hope this is helpful and if you don't have an XBOX 360 or if you use WPA for security the setup should be easier.
So far so good with the Zyxel WAP3205...I had used the Linksys WET610N (2 separate units) and they both failed. The first one worked a couple of days before the wireless stopped working and the second one's wireless failed right out of the box. The WET610N's are way easier to configure but they are too expensive and for me totally unrealiable. The WAP3205 is a steal and worth the effort when you consider the rock solid connection I have now, besides it was less than half the price of the Linksys. It's not as nice looking as the Linksys that's for sure but the main thing is it works as described.

Click Here to see more reviews about: ZyXEL WAP3205 Wireless N access point, Ethernet client, and universal repeater

WAP3205 is more than just another 300Mbps access point; it's a multifunction 11n tool that can be used in a variety of scenarios.In addition to Access Point mode, it can also be a Universal Wireless Repeater, extending the range of your existing network.Unlike other repeaters, the WAP3205's extender mode works with the latest WPA/WPA2 security technologies, so security doesn't have to suffer when extending your network.The WAP3205 also has the ability to function as a wireless bridge, allowing you to connect non-wireless network compatible devices to your existing network.Simply plug in your Ethernet based TIVO, Smart TV, Blue Ray player, network storage device (NAS), or game system into the WAP3205, and it can now join your wireless network.No software or drivers to be installed. With an 11n compatible data transfer rate of up to 300Mbps*, which is 6 times faster than 11g, you can enjoy high-speed network connection and high-definition video streaming with no jitters or dropped calls.It also works with your existing 802.11b and 802.11g network devices. Some wired devices such as modems, set-top boxes, digital media adapters and storage devices might not be natively wireless capable. In order to connect these without additional wiring, driver installation or configuration, just plug the Ethernet cable into the WAP3205 and connect to another wired device to get connected wirelessly. With the built-in Universal Repeater mode, WAP3205 can connect to most popular access points or wireless routers while simultaneously acting as an access point to provide wireless connectivity to all other wireless devices such as notebooks. In other words, WAP3205 can extend the wireless coverage to the entire home premise and enable all wireless devices to link to the existing networkthis is especially helpful for larger home environments.Since this is all done wirelessly, there's no need to run additional Ethernet cables to extend your network

Get 29% OFF

Click here for more information about ZyXEL WAP3205 Wireless N access point, Ethernet client, and universal repeater

Read More...

Alfa Network Router / Client Bridge 802.11g up to 400mW Review

Average Reviews:

(More customer reviews)I am computer literate and live in an apartment that hates any number of wireless frequencies. The other reviews for this router made it appear to be a good compromise - difficulty in set-up in exchange for awesome signal strength.
Unfortunately I was unable to verify this as I never made it through the "set-up" process. The included documentation is sketchy, poorly laid-out, and very obtuse, and there is no simple walk-through for a home set-up. I've set up wireless networks before and have built my own computer, but I was completely defeated by this device. I do not recommend it except perhaps for the networking professional. Honestly, DO NOT BUY this product if that doesn't describe you.
I am only giving it two stars because it does seem to have good signal strength - and I'm hopeful that I'll be able to return it to DBROTH.

Click Here to see more reviews about: Alfa Network Router / Client Bridge 802.11g up to 400mW

This is a high-power indoor Wi-Fi mesh router and it's available in 2.4 GHz (802.11b/g) model. AIP-W610H is a High-Power WLAN Broadband Router which fully supports the AP / Bridge/ Client/ Repeater/ Router / Mesh/WISP/Gateway / AP+WDS / WDS features and functional compliance of IEEE 802.11b/g standard. It is designed to provide good performance and enhance the advantages of robust system and cost-effective.AIP-W610H is targeted at competitive price-performance, better power management, SOHO and business offices. Full Passive PoE Support (4LAN+1WAN)Data Sheet

Click here for more information about Alfa Network Router / Client Bridge 802.11g up to 400mW

Read More...

ASUS RT-N12 Wireless-N Router, Access Point, and Repeater Review

Average Reviews:

(More customer reviews)The short review is: excellent router, extremely easy to set up, great range, good stability, nice white color, absolutely no complaints.
Here's the longer review:
I took a total risk on this router...there were no reviews on Amazon, I'd never heard of ASUS, and wasn't convinced that ordering it was a good idea. However, the price was right, and I had just spent frustrating hours trying to configure a Netgear route. My previous router, a D-link, had a "known issue" that the manufacturer solved by discontinuing the model's support. So, I thought, let me try this unknown brand and see what happens. If worse comes to worse I'd just return it to Amazon.
WOW was I pleased! Literally, 10 minutes after I had opened it, I had it configured as an access point, had logged into the router from my wireless laptop, and had set up a password to encrypt the network. I've set up maybe 5-7 routers in my life and always dread it... this was by far the easiest experience I've ever had. In the picture on the site, this router looks like it's an ugly grey color. It is a shiny smooth white - think Apple ipod aesthetic - with nice white antennas. Very aesthetically pleasing.
Though the advertising for this router states "diskless setup" it come with an optional setup disk. I did not use it as I wanted to test the advertising's claim...and am pleased to say it's an example of truth in advertising!
I'm also getting very good signal strength, speed and stability...I will DEFINITELY update this review if I run into issues, but overall I'm giving this thing 5 stars (and I almost never give 5 stars because I think everything has room for improvement) because it was so inexpensive and easy to set up, and performs exactly as advertised.
I am using this router as an "access point" which means it is connected via ethernet cable to another router and serves to extend the range of my wireless network. There's a switch on the back that allows you to select access point mode, standard router mode, or bridge/repeater mode.
HIGHLY RECOMMENDED!
Update 5/10/2010- still working great... I put some white electricians' tape over the blue LEDs in front as they were too bright, but other than that, no issues at all. I forget it's there - it just works all the time without needing to be unplugged every so often like my other routers.... my wireless devices are always connected to it and don't lose signal. Still a 5-star review.

Click Here to see more reviews about: ASUS RT-N12 Wireless-N Router, Access Point, and Repeater

ASUS RT-N12 - SuperSpeedN Wireless Router 300Mbps Super Speed - CD-Free Installation and Manual-Free Management - 4-Network-in-1 - Hardware EZ Switch for router, repeater and AP mode quickly changing.

Click here for more information about ASUS RT-N12 Wireless-N Router, Access Point, and Repeater

Read More...