Showing posts with label dvr. Show all posts
Showing posts with label dvr. Show all posts

2/02/2012

Actiontec MegaPlug A/V 200 Mbps Powerline Network Adapter Kit (White) Review

Actiontec MegaPlug A/V 200 Mbps Powerline Network Adapter Kit (White)
Average Reviews:

(More customer reviews)
Years ago, I purchased one of the first through-power-line Ethernet kits on the market. At the time, the claimed throughput was low (say, 10mbps), and the actual throughput was ridiculously slow. Not to mention the fact that the connection seemed to hang inexplicably with great frequency. In a word: Not ready for primetime, not ready for anything, really...
Fast forward nearly a decade. By now, wireless Ethernet routers are cheap and easy to use and just about everyone has one.
Into this environment, Actiontec has dumped their new MegaPlug "200 Mbps" powerline network kit.
Your first question, and it's a good one, is: "What's the point?" And for many people the answer will be "none, really, in your situation."
BUT there are two sets of people for whom something like this--if it works--is a godsend.
First off, there are those who simply cannot set up something like a wireless router. It's not hard, but there are still a lot of complete tech phobes out there. Think: your Grandparents, or maybe even your parents. Sure, you could go over and set things up for them. But then what happens the first time the router goes down and needs to be rebooted or whatever? Panic calls at midnight are not most people's idea of bonus time.
The second set of people who could use something like this, if it works, are those with wireless dead spots in their homes. There are a lot of people like this, actually. No matter where you set up the wireless transmitter, some places just get no signal, or a very lousy one. Now, you can--if you are technically inclined--set up a wireless repeater to address issue. But it's a bit tricky for most people who don't relish spending their Friday night shopping the halls of Frys, Microcenter or BestBuy. This kit offers a simple alternative to a wireless repeater.
OK, enough on who might want this. On to the more significant question: Does it actually work, and how easy is it, really, to set up.
I'll answer the second question first. It is ridiculously, stupidly, unbelievably easy to set this up. Plug one unit in one wall outlet. Run ethernet cable from unit to your router. Plug second unit into another wall outlet anywhere else in your house. Run either cable from unit to the device you want to talk to router. And you are done. Even if you have trouble figuring out how to open the door of a refrigerator, it can't take you more than 5 minutes to set up.
And how does it work? SHOCKINGLY well. In a three story home with about 20 separate circuits (lines on their own circuit breakers), I was unable to find two outlets that could not communicate with each other at a reasonable speed, and without any disruptions. You aren't going to see 200Mbps in the real world, but I saw between 24Mbps and 34Mbps, depending on where I placed the two outlet plugs. Before you sneer, this compares to a normal transfer rate of about 18Mbps for a GOOD wireless G connection. In other words, the Actiontec kit gave transfer rates that were between 33% and 90% FASTER than wireless G!
I can recommend this unconditionally to those who need an alternative to standard wireless with one caveat (and it's a big one): This kit is quite pricey. It runs over a hundred bucks at the time of this writing, as compared to a good quality wireless G router, which can be purchased for as little as $30. In addition, this kit is good for connecting only one location to another single location, whereas wireless is...everywhere.
But if you can get past the price, this kit is terrific.

Click Here to see more reviews about: Actiontec MegaPlug A/V 200 Mbps Powerline Network Adapter Kit (White)

Actiontec MegaPlug HPE200AVP Kit Powerline Network Adapter HLE20003-01KP 754

Buy NowGet 17% OFF

Click here for more information about Actiontec MegaPlug A/V 200 Mbps Powerline Network Adapter Kit (White)

Read More...

2/01/2012

Cisco-Linksys USB100TX EtherFast 10/100 USB Network Adapter Review

Cisco-Linksys USB100TX EtherFast 10/100 USB Network Adapter
Average Reviews:

(More customer reviews)
I just received my USB100TX and connected it directly to my TiVo Series 2 with the supplied USB A-B cable. It does *not* come with a CAT-5 UTP Cable, but I have plenty spare and hooked it up. As soon as it was wired to both the TiVo and a hub in my nearby wiring closet the link light was activated. I did not need any of the manuals or driver disks that came in the package.
Within minutes I'd configured my TiVo to recognize the network adapter and my Linksys BEFSR41 Firewall/Router had allocated it a DHCP address.
I immediately ran the test-connection and also forced a daily update.
Downloading schedules are super quick compared to the dialup option. Obviously new firmware updates will also be significantly quicker. Plus the phone line won't be tied up during the call.
I had previously tried a different USB/Ethernet adapter and my TiVo did not recognize it (D-Link USB-650) so beware of using that on a TiVo.
The Linksys USB100TX is the wired adaptor recommended by TiVo and it works perfectly, first time.

Click Here to see more reviews about: Cisco-Linksys USB100TX EtherFast 10/100 USB Network Adapter

The Linksys EtherFast 10/100 USB network adapter allows you to instantly connect to a network from a USB-enabled desktop or notebook PC with Windows 98. The plug-and-play device attaches to any USB-enabled PC or hub (10, 100, or 10/100 Mbps) via a USB type B receptacle. The Linksys EtherFast 10/100 USB network adapter is bus powered, drawing power from the host PC and requiring no external power cords. It features a maximum of 12 Mbps throughput (the maximum supported by USB).
Included with the adapter are a one-year limited warranty and free technical support.

Buy NowGet 68% OFF

Click here for more information about Cisco-Linksys USB100TX EtherFast 10/100 USB Network Adapter

Read More...